Alarm technology: Accessories

Alarm unit SAG-122

Alarm unit, with strobe light signalling system, LED technology.

Visual and audible signal device, can be controlled individually
16 LEDs, polycarbonate cover
Piezo siren
ABS plastic housing
Reverse polarity protection
Operating voltage: 12 V DC current
Connection cable: 30 cm

Specifications:

SPL: 122 dB, ± 5 dB
Current consumption: 12 V DC current /250 mA (siren + flash) 12 V DC current /100 mA (flash only)
Dimensions: Ø 110 mm x 46 mm
Flash energy: -

Price per unit (Order No. mo-043700) - not available

Alarm unit SAG-22

Alarm unit, with strobe light signalling system in LED technology.

Impact-proof plastic housing
Siren activation PCB and flashlight PCB are moisture-proof due to special coating
Luminous power of the LEDs: 6 x 4.5 cd
Cover contact and tear-off wall cable
Supplied with screws and dowels
Admissible ambient temperature: -20 °C to +70 °C
Operating voltage: 12 V DC current

Specifications:

SPL: 100 dB
Current consumption: 12 V DC current /120 mA (siren) 12 V DC current /20 mA (flash)
Dimensions: 190x270x85 mm
Flash energy: -

Price per unit (Order No. mo-041870) - not available (_)

Alarm unit SAG-42

Alarm unit, with strobe light system.

Impact-proof and UV-resistant polycarbonate housing
Visual and audible signal device
Piezo siren
Electronic flash and red spherical cap
Suitable for indoor and outdoor applications
Operating voltage: 12 V DC current

Specifications:

SPL:>100 dB
Current consumption: 12 V DC current /370 mA (siren) 12 V DC current /200 mA (flash)
Dimensions: 110x260x65 mm
Flash energy: 2.5 Ws

Price per unit (Order No. mo-043090) - not available

Infrared reflection light barrier IRS-100

Infrared reflection light barrier, with relay output and LED indication.

Operating range: 0.2-14 m
Relay contact rating: 48 V /3 A, 30 V DC current /3 A
2 m connection cable, 5 cores, 22AWG
Weatherproof and hose-proof (IP66)
Power supply: 12-48 V DC current /12-48 V /65 mA
Admissible ambient temperature: -20 °C to +55 °C
20x63x39 mm

Price per unit (Order No. mo-042940) - not available

Glass break sensor VDS-2GBD/WS

Glass break sensor, with 4 m connection cable, white. Moulded and of compact size. Signal latching in case of glass breakage. Power supply via the alarm control centre. NO contact.

VdS (German assn. for property insurers) no.: G 196614, class B
Detection range: 1.5 m max.
Quiescent current:<10 µA
Power supply: 3-16 V
Alarm switches: approx. 3.7 mA/6 V
Admissible ambient temperature: -25 °C to +70 °C
Dimensions: 19x19x11 mm
Weight: 66 g

Price per unit (Order No. mo-041330) - not available

Piezo alarm siren AP-4

Piezo alarm siren

2,100 Hz dual sound
Voltage range: 6-15 V DC current
Low power consumption
SPL: 105 dB/1 m
Alarm signal: dual sound (2,100 Hz)
Power supply: 12 V/120 mA
Dimensions: 106x106x45 mm
Weight: 165 g

Price per unit (Order No. mo-040020) - not available

Piezo alarm siren AS-122

Piezo alarm siren

Low current consumption due to piezo technology
ABS plastic housing
Voltage range: 6-14 V DC current
SPL: 117 dB/1 m
Alarm signal: wailing sound
Power supply: 12 V/150 mA
Dimensions: Ø 85 mm x 42 mm
Weight: 82 g

Price per unit (Order No. mo-043920) - not available

Piezo alarm siren AS-132

Piezo alarm siren

Low current consumption due to piezo technology
ABS plastic housing
With wall bracket
Voltage range: 6-14 V DC current
SPL: 117 dB/1 m
Alarm signal: wailing sound
Power supply: 12 V/150 mA
Dimensions: Ø 56 mm x 40 mm
Weight: 82 g

Price per unit (Order No. mo-043930) - not available

Piezo alarm siren AS-142

Piezo alarm siren

Low current consumption due to piezo technology
ABS plastic housing
With mounting plate
Voltage range: 6-14 V DC current
SPL: 117 dB/1 m
Alarm signal: wailing sound
Power supply: 12 V/150 mA
Dimensions: 56x74x49 mm
Weight: 90 g

Price per unit (Order No. mo-043940) - not available

Piezo alarm siren AS-362

Piezo alarm siren

Moisture-proof due to water-repellent segments
Low current consumption due to piezo technology
Slimline version
2 different chimes
Tamper switch
Voltage range: 6-14 V DC current
SPL: 105 dB/1 m
Alarm signal: continuous or wailing sound
Power supply: 6-14 V/120 mA
Dimensions: 110x110x32 mm
Weight: 135 g

Price per unit (Order No. mo-043140) - not available

Alarm siren AS-612

Alarm siren, dynamic.

Voltage range: 6-13.8 V DC current
SPL: 110 dB
Alarm signal: wailing sound
Power supply: 12 V/1 A
Dimensions: Ø 136 mm x 140 mm
Weight: 550 g

Price per unit (Order No. mo-040070) - not available

Strobe light BAL-230

Strobe lightXenon strobe lamp, very high luminous intensity Plastic housing according to IP54 230 V /50 Hz/5 VA Supplied with wall bracket

Specifications:

SPL: -
Current consumption: 230 V /50 Hz/5 VA
Dimensions: Ø 123x143 mm
Flash energy: typ. 2 Ws

Price per unit (Order No. mo-041550) - not available (_)

Junction box DB-247/WS

Junction box

Small version, empty
44x30x15 mm

Price per unit (Order No. mo-330160) - not available

Reed contact FF-50/WS

Reed contact, to be used in alarm systems for monitoring and securing doors and windows.For flush-mounting, pulsed operation Designed as NC contact/opening detector, contact closed when magnet distance<20 mm Contact rating: 30 V DC current /0.1 A max. Magnet (AINiCo500): Ø 8x30 mm Connection cable: 2 cores Cable length: 2 m

Attention: The specifications stated are maximum values. Even a short-term overload may lead to damage of the contact! The reed contact is suitable for use with DC voltage only!

Price per unit (Order No. mo-040320) - not available (_)

Multi-purpose connection box, made of ABS JA-192PLA

Hybrid alarm system JABLOTRON-100: Professional wireless/bus hybrid alarm system with new standards regarding the safety level, functionality, convenience and design. The system JABLOTRON-100 is tested according to EN 50131 class 2 and combines all the advantages of a wireless alarm system with bus technology and a safe web server-based communication. It is ideally suited for projects with numerous system components, many users and several security areas. The installation can either be realised solely with wireless technology or bus technology or a combination of wireless/bus hybrid technology. The alarm control centre features a GSM communication module as standard. For wireless transmission, the system uses the particularly narrow-band and safe wireless transmission in the frequency range 868 MHz. This alarm system features a clearly arranged setup and a unique controlling and operating concept. Separate on and off buttons allow for an easy operation, even with complex systems. The comprehensive traffic light display allows to easily identify the status of the system. The system can be accessed via smartphone. After registering with the web service, extensive control functions are available. This service is free of charge. However, permanent Internet connection is required. Due to the remote access via smartphone or PC, it is possible to request the status of the system or control connected devices, e.g. controlling the heating system or similar from a distance (home automation). Installation and initial operation must be carried out by trained and authorised personnel only. This ensures a professional installation and thus guarantees both a consistently high safety level and functionality of the system.

Cable protecting sleeve MPT-30/WS

Cable protecting sleeve

Length: 300 mm, for protecting alarm wires at doors and windows, etc. Equipped with 2 mounting flanges. MPT-30/WS = white, inside: Ø 7 mm

MPT-30M = chromium-plated, inside: Ø 6 mm

Price per unit (Order No. mo-040960) - not available (_)

Blank key NRK-325

Blank key, for key switch NS-30 and NS-250.

Price per unit (Order No. mo-011720) - not available

Key switch NS-10

Key switch

Switching contact 1 x ON, 120 V /1 A
Mounting hole: Ø 16 mm

Price per unit (Order No. mo-011270) - not available

Key switch NS-15

Key switch

Switching contact 1 x ON, 120 V /2 A
Mounting hole: Ø 12 mm

Price per unit (Order No. mo-011280) - not available

Key switch NS-250

Key switch

Switching contact, 1 x ON/ON, 150 V /3 A
Mounting hole: Ø 19 mm

Price per unit (Order No. mo-011290) - not available

Key switch NS-30

Key switch

Switching contact 1 x ON, 150 V /3 A
Mounting hole: Ø 19 mm

Price per unit (Order No. mo-011300) - not available

Momentary key switch NS-32

Momentary key switch

Contact for momentary action 1 x ON, 150 V /3 A
Mounting hole: Ø 19 mm

Price per unit (Order No. mo-012910) - not available

Alarm key switch NSA-80

Alarm key switchMat aluminium front panel, fibre glass reinforced polyester rear panel Tamper switch

Version:

NSA-80 = surface-mounted, w/o cylinder lock

NSA-90 = surface-mounted, with cylinder lock and 3 keys

Dimensions: 88x118x50 mm

Price per unit (Order No. mo-041080) - not available (_)

Alarm key switch NSA-90

Price per unit (Order No. mo-041060) - not available (_)

Reed contacts SAS-4/BN

Reed contacts, to be used in alarm systems for monitoring and securing doors and windows.

Brown (BN) or white (WS) housing
Surfacing mounting, pulsed operation
Designed as NC contact/opening detector
Contact rating: 30 V DC current /0.1 A max.
Contact: 50x12x14 mm
Magnet: 50x14.5x10 mm
Type of mounting: for parallel mounting

Attention: The specifications stated are maximum values. Even a short-term overload may lead to damage of the contact! The reed contact is suitable for use with DC voltage only!

Price per unit (Order No. mo-040700) - not available

Electric lock release SAS-5VDS

Electric lock release, for mounting into standard door locks.

When locking the door, the bolt activates the contact (NO/NC, 30 V DC current /0.1 A)
Micro switch IP50
Contact material: fine silver
Soldering connection

VdS (German assn. of property insurers) approval number: G107060

Price per unit (Order No. mo-041530) - not available (_)

12 V relay module SC-35

12 V relay module, e.g. for extending alarm centres with semiconductor outputs.

4 independent relays
Outputs alternatively NO/NC

Price per unit (Order No. mo-043170) - not available (_)

Reed contact VDS-34FF/WS

Reed contact, to be used in alarm systems for monitoring and securing doors and windows.

For flush-mounting, pulsed operation
Designed as NC contact/opening detector
Contact rating: 30 V DC current /0.1 A
Magnet (AINiCo500): Ø 8x30 mm
Connection cable: 4 cores
Cable length: 4 m
VdS (German assn. of property insurers) approval number: G199538, class B

Attention: The specifications stated are maximum values. Even a short-term overload may lead to damage of the contact! The reed contact is suitable for use with DC voltage only!

Price per unit (Order No. mo-040810) - not available (_)

Sticker "ALARM", adheres to the outside ALARM-LABL/OS

Alarm technology: Accessories, Sticker — Enlarge

Sticker "ALARM", adheres to the outside

Size: 120x80 mm
Material: PVC film
Resistance to weathering and light: 2 years
Adhesive strength: 2 years

Price per unit (Order No. mo-462770) EUR 0,45 excl. VAT: € 0.38 / $ 0.43

Sticker "SECURITY", adheres to the inside CCTV-LABL/IS

Sticker "SECURITY", adheres to the inside

Size: 120x80 mm
Material: PVC film
Resistance to weathering and light: 2 years
Adhesive strength: 2 years

Price per unit (Order No. mo-462780) EUR 0,66 excl. VAT: € 0.55 / $ 0.64

Sticker "SECURITY", adheres to the outside CCTV-LABL/OS

Sticker "SECURITY", adheres to the outside

Size: 120x80 mm
Material: PVC film
Resistance to weathering and light: 2 years
Adhesive strength: 2 years

Price per unit (Order No. mo-462790) EUR 0,54 excl. VAT: € 0.45 / $ 0.52